PCC & structural warranty specialists, UK-wide enquiries@onestopconsult.co.uk02475 095700

Flats and apartments

Structural warranty for flats: new blocks and conversions

Flats raise questions a single house doesn't: one building, several buyers, several lenders and shared parts that belong to no single flat. Here's what lenders ask for, how a PCC works on flats and what to check before you start.

Do flats need a structural warranty?

Not by law. The requirement comes from mortgage lenders. Under the UK Finance Mortgage Lenders' Handbook, lenders will generally only lend on a newly built or newly converted home if it has a warranty or a Professional Consultant's Certificate (PCC). A flat counts as a home in the same way a house does.

So if the flats will be sold or mortgaged, expect to be asked. That applies to:

  • A new block of flats, large or small
  • Offices, shops, pubs and other buildings converted into flats
  • A house split into two or more flats
  • New flats added above or beside an existing building

A PCC is a professional certificate, not an insurance policy, and each lender decides whether to accept one. That matters more with flats than with a single house, as the next part explains.

What is different about flats

  • Several buyers, several lenders: every flat is sold separately, and each buyer's lender makes its own decision. You can't know in advance which lenders your buyers will use.
  • A certificate for each flat: each completed flat gets its own certificate, which goes to that buyer's solicitor and lender.
  • Shared parts: the foundations, frame, roof and stairs serve every flat. Some lenders ask that the certificate also covers these shared parts, so ask about the building as well as the flat.
  • Limits on numbers: some lenders limit how many homes a scheme can have before they'll accept a PCC, and some only accept a PCC for houses. The limits change, so check the current position.

PCC or insurance-backed warranty for flats?

There are two routes. A PCC is signed by a qualified professional who inspected the work at key stages. An insurance-backed warranty is a latent defects insurance policy from a warranty provider, and it normally has to be arranged before work starts.

On a small scheme, such as a house split into flats or a building of a few flats, a PCC is often used. As the number of flats goes up, more lenders may say no to a PCC, and an insurance-backed warranty widens the number of buyers who can get a mortgage. We quote for PCCs, and One Stop Consult, our group, can help you get warranty quotes from a suitable provider, so tell us the number of flats and we'll say straight which route suits the scheme.

Our PCC or structural warranty guide puts the two side by side, and the small developers guide covers the site size limits in more detail.

What gets inspected on a block of flats

The visits follow the build while each part can still be seen, as they do on a house. On flats the notes tend to cover more of the frame and the shared areas. These examples come from our own inspection records:

  • Foundations: on a two-storey building of four flats, the piles and ring beam were seen complete, with the radon barrier in position and taped.
  • Concrete frame: on a six-storey block, the steel reinforcement was checked against the structural engineer's design at the base, the columns, the lift and each floor in turn, with the concrete cover checked as the floors went up.
  • Outer walls: on the same block, the external steel framing was seen with its fire board and fire-rated insulation going on.
  • Shared areas: on the four-flat building, the smoke ventilation to the shared stair was covered with the site manager during the build.

Our inspection stages guide explains each stage and how many visits past schemes had.

Converting offices or a house into flats

A conversion adds a second question: is the old building sound enough for what is being put into it? Expect to be asked for a structural engineer's report on the existing structure, and for more evidence up front than on a new build.

On an 1836 workhouse turned into four flats and four houses, our records show new internal foundations, steel beams on concrete padstones, new block walls between the homes and a new first floor, all inside the old outer walls. On an office conversion into 27 flats, a light steel-framed storey was added on the roof for three penthouses.

Turning offices into flats under permitted development rights does not remove the need for Building Regulations approval. A change of use to flats needs it whether or not full planning permission was required, and lenders normally expect the Building Control completion certificate as well as a PCC or warranty. Our conversion warranty guide covers barns and other existing buildings.

Tests flats need before sign-off

Flats share walls and floors, so Part E of the Building Regulations sets sound insulation standards between them, and new and converted flats usually need sound testing before Building Control will sign off. Air tightness, ventilation and energy paperwork are needed too. On the workhouse conversion above we arranged these alongside the inspections. If it helps to keep everything in one place, see the other services we can add.

Ask the lenders first

Before you commit, ask your own funder, and a broker who knows the lenders your buyers are likely to use. Get the answers in writing:

  • Will you accept a PCC on a flat, or only an insurance-backed warranty?
  • Is there a limit on the number of flats in the building or on the site?
  • Does the certificate need to cover the shared parts of the building?
  • Do you treat a conversion differently from a new block?

Our PCC for a mortgage guide has more on what lenders look at.

Flats on our projects page

Each of these has its own page showing the stages inspected:

There are more on our projects page.

What to send for a quote

  • The building: the address, the number of flats and the number of storeys.
  • New or converted: if it's a conversion, what the building was before.
  • Drawings: planning and Building Regulations drawings, as far as they've got, and any structural engineer's report.
  • Where you're up to: your start date, or the stage the build has reached.
  • Who's asking: your funder, a buyer's solicitor or a lender, and what they've said in writing.

We'll tell you what's needed and give you a fixed quote before you commit.

Get a free quote

Common questions

Frequently asked questions

Do flats need a structural warranty?

It isn't a legal requirement, but lenders will generally only lend on a newly built or newly converted flat that has a warranty or a PCC. If the flats will be sold or mortgaged, you'll usually be asked for one.

Does each flat get its own certificate?

Yes. Each completed flat gets its own certificate for that buyer's solicitor and lender. Some lenders also ask that it covers the shared parts of the building, so check what your buyers' lenders want.

Can a PCC be used for a block of flats?

On small schemes it often is. Some lenders limit how many homes a scheme can have before they'll accept a PCC, and some only accept one for houses, so the more flats there are, the more it is worth looking at an insurance-backed warranty too. Tell us the number of flats and we'll talk it through.

Does an office to flats conversion need Building Regulations approval?

Yes. Changing a building's use to flats needs Building Regulations approval, including where the change is allowed under permitted development rights. Lenders normally expect the completion certificate as well as a PCC or warranty.

The flats are finished and there is no warranty. What can I do?

A retrospective PCC may be possible, depending on the records kept during the build and what can still be seen. Some lenders won't accept one, so ask the lender first.

I'm buying a new or converted flat. What should I check?

Ask your solicitor what cover the flat has, who signed it and whether your lender accepts it for a flat in that building. Our buying a home with a PCC guide lists what to check.

Building or converting flats?

Send the address, the number of flats and your drawings. We'll tell you what's needed and give you a fixed quote.

Call us Get a free quote